How to Lay Cobble Setts: Step-by-Step Guide for Paths & Borders

11 Nov 2026

Paving

cobble setts kandle grey edging a driveway

Natural stone cobble setts can turn an ordinary garden path into a feature or create a tidy border around a paved patio. Their smaller dimensions are useful for curves, edging and detailed layouts, but a good result depends as much on the base and jointing as on the stone itself.

This guide explains how to lay cobble setts for a pedestrian garden path or patio border. It is not a specification for a driveway or other vehicle-bearing surface: those need a design appropriate to the expected loading, ground conditions, drainage and paving system.

Kandla Grey sandstone cobble setts used as an edging detail
Natural Paving Store media gallery: Kandla Grey cobble-sett edging.

Before you start: choose the right cobble-sett size

Setts are generally cut or cropped stone units with a roughly rectangular or square face. They are often called cobbles in garden paving, although traditional rounded cobbles are a different product. At Natural Paving Store, you can compare sandstone, limestone and granite cobble setts in several formats.

Thickness, edge finish and the bedding specification matter. Do not assume that all cobble setts are suitable for driveways or that a thin decorative sett can be installed in the same way as a thicker cropped stone.

How many cobble setts do you need per square metre?

As a planning guide for selected Natural Paving Store natural stone ranges, allow approximately 90 pieces per mยฒ for 100 ร— 100 mm setts or 45 pieces per mยฒ for 200 ร— 100 mm setts. Actual coverage depends on the joint width, dimensions and product specification, so check the individual product page.

For example, a 4 mยฒ path would need around 360 small setts or 180 rectangular setts before a waste allowance. Adding around 10% for cuts and breakages brings the planning quantities to approximately 396 or 198 respectively. Curved borders can need more cuts.

Tools and materials for laying cobble setts

You will typically need a tape measure, setting-out string, pegs, shovel, rake, compaction equipment, spirit or laser level, rubber mallet, suitable sub-base aggregate, bedding mortar, compatible bonding primer where specified, and a jointing product approved for your stone and joint size. Use appropriate protective equipment and safe cutting methods.

Step 1: Plan the shape, lines and drainage

Mark out the path or border and decide whether you want square setts laid in neat courses, rectangular setts in staggered rows, or a curved edging band. Check finished levels against doors, drains and adjacent paving.

Plan a suitable fall so water drains away from buildings and does not collect on the surface. Consider the height of the adjacent patio slab: the cobble border should not create a trip edge or trap water.

Step 2: Excavate and prepare the sub-base

Remove vegetation and unsuitable material, then excavate far enough to accommodate the required compacted sub-base, bedding layer and actual sett thickness at the finished level.

Install and compact an appropriate granular sub-base in suitable layers. Its thickness and specification depend on the ground and intended use; there is no safe universal excavation depth for every garden. Very soft or unstable ground and any area carrying vehicles require a suitable design rather than guesswork.

For further background, see our paving installation guide.

Step 3: Set firm edges and a consistent reference line

Where the setts form a path or paved surface, provide effective edge restraint so the outer units cannot spread. Set a string line or straightedge at the correct finished height and check the planned fall. Where the setts are used to edge paving, confirm the relationship to the adjoining slabs before mixing mortar.

Step 4: Prepare the full bedding layer

For a rigid natural-stone sett installation, use a suitable, workable cementitious mortar system and provide continuous support beneath each sett โ€” not isolated spots of mortar. Some natural-stone sett manufacturers describe a bedding layer in the region of 40 mm, but the correct mix and depth depend on the product and system specified.

A compatible bonding or slurry primer may be required on the stone underside. Follow the paving and primer manufacturers’ instructions; don’t assume the same mix suits sandstone, limestone, granite and porcelain.

Step 5: Lay each sett and check its level

Begin from a straight reference edge and work in manageable sections. Position each sett onto the prepared full bed and tap it carefully with a rubber mallet. Regularly check alignment, fall and a walkable, even surface. Cropped natural stone may vary in thickness, so take time to bed each piece correctly rather than forcing the surface flat with excessive tapping.

Stagger joints where the pattern allows and maintain a consistent joint width suited to the sett finish and jointing material. Cropped setts often have wider joints than sawn-edge setts. Never copy a joint width from another product without checking the instructions.

Step 6: Cut the edges safely

Measure and mark end cuts rather than filling awkward spaces with tiny fragments. Stone cutting can create hazardous silica-containing dust, especially when cutting sandstone or granite. Minimise cutting where possible and use appropriate dust suppression, respiratory protection and other safety measures. The HSE guidance on cutting paving is not a substitute for training; use suitable equipment or a competent installer.

Step 7: Joint the cobbles

Once the bedding has reached the stage specified by the manufacturer, fill the joints completely with a compatible mortar or approved external jointing compound. Select the product for the actual joint width, depth, stone surface and intended traffic. Do not assume that every brush-in compound is suitable for deep or wide natural stone sett joints.

Keep the sett faces clean while pointing and remove residue promptly using a method safe for the stone. Explore our jointing compound range and follow the selected manufacturer’s preparation and curing guidance.

Step 8: Allow the installation to cure and care for it

Keep people and furniture off until the whole bedding-and-jointing system is ready for use. Curing depends on the materials, temperature and weather โ€” a joint that feels hard does not necessarily mean the mortar bed has finished curing.

For routine care, sweep grit and leaves, remove weeds carefully, inspect damaged joints and clean with stone-compatible products. Test any cleaner on a discreet area first. Sealing natural stone may be an option, but it is not always necessary and should be chosen for the particular finish.

Common cobble-sett laying mistakes

Frequently asked questions

Can cobble setts be used around a sandstone patio?

Yes. Setts are a good way to frame a natural stone patio, create a contrasting band or separate paving from flower beds. Consider colours such as Kandla Grey, Raj Green or Fossil Mint alongside our Indian sandstone paving slabs.

Can I lay 40/60 mm setts on sand?

Different paving systems use different bedding methods. This article covers a rigid, mortar-bound installation; don’t switch to loose sand bedding without confirming that the selected product and project are designed for an unbound system.

Are 100 ร— 100 mm or 200 ร— 100 mm setts easier to lay?

The smaller squares suit tight curves and detailed edging but require more individual pieces. The longer rectangles make it easier to create straight, staggered courses. Compare 100 ร— 100 mm setts with 200 ร— 100 mm setts.

Planning a path or patio edging? Start with our full cobble-sett collection, refer to the installation guide and contact our team if you’re unsure about a product’s suitability.